Engine 7-1

Engine 7-1
2009 Crimson Engine

Engine 7-1 is a 2008 Crimson Custom Pumper on a Spartan Gladiator chassis. This piece is setup as our primary structural response engine. Engine 7-1 has a 1750 GPM 2-stage Waterous pump, with an on-board water capacity of 750 gallons, 2 large diameter intakes and 2 large diameter discharges. The pump is also equipped with an “around the pump” foam injection system, allowing us to put Class B AFFF foam into any of our pre-connected attack lines. This is also our primary mutual aid response engine.

The hose lines carried include: 2 – 1-3/4″ x 200′ cross-lays, 1 – 2-1/2″ x 200′ cross-lay, 2 – 1-3/4″ x 100′ trash lines, 1 – 2-1/2″ x 300′ flat load (100′ pre-connected and 200′ dead-loaded), 1 – 3″ x 300′ pre-connected apartment load with a gated-wye (for high-rise applications) and 2000′ of 5″ large diameter hose (LDH) for water supply.

The crew cab has seating for 8 crew members (Driver, 5 pack seats and 2 non-pack jump seats. The cab also contains the enclosed pump panel. With the enclosed pump panel, it allows the pump operator to control everything from inside teh safety of the climate controlled cab. This includes the remote operated TFT Hurricane Master Stream device. This engine carries all of teh equipment that was carried on the retired engine with room for expansion and the addition of new equipment.